Photographica Pages

An online guide to collectable cameras and related stuff

Rolleiflex 2.8F Display Dummy

Many camera manufacturers sold dummy cameras to camera stores for display purposes. They were quite a bit less expensive for the dealer than a working model, and were of use when they were displayed in cases or windows were they would not be removed to demo the camera. They were also used in high risk areas, where if they were stolen the store would be out less money, and the thief would have something of no value to them. The thought was that might help deter thefts.

Generally dummies look complete from the outside, and exhibit differing amounts of completeness inside. Sometimes they have functioning subassemblies inside, such as pressure plates, sometimes not. Often the lenses are only the front element, sometimes blacked out on the inside with paint or a metal plate. Again, sometimes not. It's possible in some cases that subassemblies or lenses which did not pass inspection may have been used. There is no guarantee that all of the dummies of a particular model will have identical internal construction. I would not have been important to the manufacturer.

Many of the dummies have some markings on them to indicate a dummy camera. Leitz marked their dummies with an "a" after the serial number, Rollei cameras have a "0" in front of the serial number. Nikon engraved the word "DUMMY" on the backs of Nikon F cameras and lenses, yet did not mark rangefinder cameras. We had a Voigtlander Vitessa marked on the bottom "DUMMY", "ATTRAPPE" and "FACTICE". Many are not marked in any way at all.

Although dummies shouldn't show any wear as they could not be used, and would have spent their time in a display case, many show up that have been abused. Once their useful lives were over, they were often discarded and used as a source of what parts they did have to replace knobs, levers and anything else that could be salvaged for store use on working cameras. As a result it is common to find them incomplete.

Although they were less expensive than working models, they still cost the dealer a fair amount of money, and generally only the largest camera stores could justify the expense as unlike a demo camera, they couldn't really be sold. Because of the low sales and the fact that most were stripped then discarded when the model was discontinued, they are very hard to find today, and depending upon the model, can command as much or more as a working model.

The Rolleiflex 2.8F dummy I have examined is an earlier non-12/24 model with a Planar lens. The viewing hood is removable, but it does not open. This example lacks a focusing screen and mirror. The winding lever turns, but is very wobbly and is not connected to the counter or any internal mechanism. The focus, aperture and shutter speed controls do not turn, and the shutter release lock and the flash plug lock are frozen.

Inside, the back of the lens is not blacked out, and there is a pressure plate, but it has an "A" written on it in felt pen. It is missing the film tensioning rollers, the internal baffles and the film tension spring.

Inside the viewing hood.

The inside of the back.

With the back removed.